Angle grinder injury accident 15 causes

Angle grinder body is small, and has an amazing speed of up to 10,000 revolutions,
And many people do not know that it brings convenience to people at the same time, the danger is also from this, because of the bloodshed caused by countless.
So let's talk about the causes of injury accidents and how to use it safely?

Angle grinder injury accident 15 reasons
First, do not know the basic components of the Angle mill, do not confirm the use of all parts of the machine must be checked before use, rush to use.
Second, fatigue work, drinking work, distracted state of work, the mind is not sober state of work.
Third, the working environment is not tidy, the work is tripped by the wire, the lighting condition is not good.
Fourth, wet state, rain operation, electric shock accident.
Fifth, do not work with a shield, or use a shield, but do not bias themselves.
Sixth, the installation of the grinding blade is not powered off, and the special wrench is not used, and the flange is loosened directly by hand.
Seventh, the purchase of grinding pieces did not pay attention to the highest speed marked. Purchase at will, and exceed the maximum speed allowed for cutting blades.

Eighth, give priority to the side power switch, you can hold the machine with both hands when starting, it is safer.
Ninth, there is a sudden power failure, forget to turn off the machine switch first, and after the power is turned on again, the Angle mill will give the workers a great surprise at the moment of power.
Tenth, after using the Angle grinder, forget to turn off the switch and cut off the power supply.
Eleventh, the grinding operation does not use both hands, and insists on holding the head shell with one hand for grinding.
Twelfth, before the operation, do not check the cutting and grinding pieces, deformation, notch cracks and other conditions insist on use.
Thirteenth, free use of cheap gift cutting pieces, do not consider the quality of good or bad, do not consider brand goods.
Fourteenth, the use of cutting disc grinding too hard, so that the cutting disc grinding fracture caused by injury.
Fifteenth, before the use of the Angle grinder, it is recommended that you use: protective masks or goggles to prevent splashing injuries to the eyes. Wear earplugs or earmuffs to protect your hearing from loud noises. Wear a mask to prevent inhaling dust. Wear leather gloves to protect your hands from flying debris.
Note, no knitting gloves!!! Easy to be involved in the occurrence of danger, it is best to wear a helmet, if a long time grinding operation, if a long time operation, it is best to wear a leather apron.