How to choose electric pruners? What are the maintenance methods?

First, how to choose their own electric pruning scissors
1. Identify your needs: First, you need to identify your needs. Is it domestic or commercial (pruning crew)? Pruning fruit trees or garden trees or flowers? Different scenes or tree species have different requirements for scissors. For example, household electric pruning shears are usually lighter, while pruning teams are more focused on durability and effectiveness.

2. Focus on performance metrics: Second, you need to focus on performance metrics. In general, the stronger the power of the electric pruning shears, the stronger the shear capacity. However, if the power is too strong, it may cause the machine to be unstable and the working time is not long. Therefore, you need to choose the right dynamic parameters according to your needs and circumstances.

3. Pay attention to safety performance: Finally, you need to pay attention to safety performance. Electric pruning shears will produce a certain amount of noise and vibration in the operation, and because the knife speed is fast, we must pay attention to the grip and manner of pruning to avoid unnecessary injury.

Second, the maintenance method of electric pruning scissors
1. Turn off the power No matter when and where, after using the electric pruning scissors, turn off the power first. This is a basic operation to prevent accidents, but also an important measure to extend battery life. (The simplest and most effective way to power off is to directly remove the battery and power off)

2. Fully charged standby electric pruning shears will enter the "hibernation" state if not used for a long time. At this time, fully charged standby should be used to avoid excessive discharge of lithium batteries leading to failure to charge. Must pay attention to battery maintenance during the pruning period, and must be charged once a month. Otherwise, battery life will be greatly compromised. When the electric pruning shears and batteries are not in use, they should be placed in the shade, and the temperature should be kept at 25 to 30 degrees Celsius to avoid sun explosion.

3. Wipe the knife with a wet cloth and apply anti-rust oil every time after using the electric pruning scissors, wipe the knife with a wet cloth (be sure to power off or remove the battery during cleaning, so as not to touch the switch by mistake) to remove the debris and debris on the knife edge. Then apply a thin layer of anti-rust oil, which can prevent rust on the knife edge and extend the service life. If the knife edge becomes dull, it can also be sharpened with a whetstone. For some difficult to remove stains, you can gently brush with a soft brush, and then wipe clean with a dry cloth. This daily cleaning work keeps the electric pruners in good condition and extends their service life.

4. If the knife edge of the electric pruning scissors is seriously worn, which has affected the pruning effect, it is necessary to replace the new knife edge in time. Remember not to force the use of scissors that have been severely worn, which will not only affect the work efficiency, but also may cause harm to the user.

5. Weekly reinforcement screws In order to prevent the loosening of the electric pruning shears during use, it is recommended to strengthen the screws once a week. This can effectively improve the stability of the equipment and extend the service life.

6. Non-professionals shall not dismantle the internal structure of electric pruning shears is more complex, and non-professionals shall not dismantle it without permission. If there is a fault during use, it is recommended to contact a professional for maintenance.

7. Out of reach of children At all times and places, make sure that electric pruners are out of reach of children to prevent accidents.

8. If the electric pruning shears are not used for a long time, then when they are used again, they need to be fully charged before starting to work.

9. Clean the surface with oil when the electric pruning shears are idle, you can clean the surface with a clean cloth, and then apply a layer of special lubricating oil, which can prevent pressure damage, moisture and sun protection, so that the service life of the scissors is longer.

10. Do not place the battery in the scissors for a long time The battery is an important part of the electric pruning shears, but the battery can not be placed in the scissors for a long time, otherwise it may lead to moisture damage to the internal parts. It is recommended to store the battery in a dry and ventilated place.

In short, the correct use and maintenance of electric pruning shears can not only improve work efficiency, but also extend the service life. Of course, if you encounter some problems that you cannot solve in the process of use, you can also seek the help of professionals.