2 Stroke 42cc 52cc 62cc 65cc Gasoline Brush Cutter Grass Trimmer

Maintenance of brush cutters (irrigators) after use

Firstly, clean it all thoroughly; Secondly, check all screws, oil levels, air filters, and blades for any defects. Once again, for the service life of brush cutters, strengthen the inspection or replacement of vulnerable parts, and periodic maintenance of brush cutters is more important. If you are not familiar with the maintenance of brush cutters, you can consult our after-sales personnel at Shanghai Youtuo Industry. We have professional personnel responsible for helping to solve everyone's problems.

(1) Maintenance of engine oil

Before using the brush cutter, check the oil level to see if it is in the middle of the dipstick. The oil should be changed once in the first 5 hours, once in the last 10 hours, and change the oil frequently according to the situation in the future. When changing the oil, the engine should be in a hot state in order to completely replace the old oil. If there is excessive oil, it may cause: difficulty in starting, excessive black smoke, low power (excessive carbon buildup in the cylinder, small spark plug gap), or excessive engine heat. If there is too little oil, it may cause: engine gears making loud noises or being damaged, or the sealing ring being worn or damaged, or the phenomenon of pulling tiles, causing serious engine damage. Therefore, maintenance of oil is very important.

(2) Maintenance of air filter

Before and after each use, check if it is dirty. It should be replaced and washed frequently. If it is too dirty, it can cause difficulties in starting the engine, high smoke, and low power.

(3) Maintenance of carburetors and oil circuits

Each time gasoline is added, it should be filtered through a filter and should not be left in the fuel tank for a long time. When cleaning the carburetor, a carburetor specific cleaning agent should be used, and the cleaning cycle depends on the degree of dirt on the carburetor. If the carburetor malfunctions and the engine cannot start or immediately shuts down after starting, it should be cleaned.

Today's discussion on the precautions for using brush cutters is hoped to be helpful to everyone, and it also reminds everyone to do a good job in the maintenance and upkeep of garden machinery.