Electric wrench has no force to turn, powerful reversal reasons and solutions!

As a common tool, electric wrench is widely used in machinery manufacturing, maintenance and other fields. However, sometimes we will encounter the problem that the electric wrench does not reverse the force, what is the reason? Below, I will start from several possible reasons for you to answer in detail.

First, it may be that the battery of the electric wrench is low. The battery of the electric wrench is its core power source, and the lack of power will lead to insufficient torque, which makes it weak when turning or powerful when reversing. The solution to this problem is to replace the battery or charge it in time to ensure that the battery of the electric wrench is in sufficient condition.

Secondly, the transmission components of the electric wrench may be faulty. The transmission component is an important part of the normal operation of the electric wrench, and once the fault occurs, it will affect the torque output. For example, transmission gear wear, loose threads, etc., will lead to the reverse of the electric wrench. The way to solve this problem is to check whether the transmission parts are normal and replace the damaged or loose parts in time.

In addition, the torque adjustment of the electric wrench may be set improperly. Electric wrenches are usually equipped with torque adjustment devices to adjust the output torque. If the torque adjustment is too small, it may feel no force when turning smoothly; If the torque is adjusted too much, it will be powerful when reversed. Therefore, we can solve this problem by reasonably adjusting the torque adjustment device to ensure that the torque output is suitable for the actual demand.

Finally, the incorrect use of the electric wrench will also lead to the reverse force. For example, too fast turning speed will make the wrench can not provide enough torque when rotating; Too fast a reversal speed may exceed the torque adjustment range, resulting in a powerful reversal. Therefore, we need to pay attention to controlling the speed of the wrench to ensure that it is used within the appropriate range.

To sum up, the power reversal of the electric wrench may be caused by the following reasons: insufficient battery power, transmission component failure, improper torque adjustment and incorrect use. To solve these problems, we can replace the battery, check the transmission parts, adjust the torque adjustment device and pay attention to the use of the way to solve. As long as we ensure the normal working state of the electric wrench, we can smoothly carry out work and maintenance.