Introduction to the function, function and use of "cutting sharps" Angle grinder

01 Angle Grinder function
The Angle grinder grinds, cuts and polishes the object through the high-speed rotating grinding wheel, so as to trim, process or improve the surface of the object.
The Angle mill mainly uses the grinding grains on the grinding disc for cutting, grinding or polishing operations, and can achieve different processing effects by controlling the rotation speed and strength of the grinding disc.

02 Use
Metal processing: Angle grinder is often used for dressing welded joints, removing rust on metal surfaces and grinding metal parts, etc., which can meet the requirements of different processing accuracy.
Sand processing: In the construction and decoration industry, Angle grinders are used for cutting and polishing of sand, such as stone, brick, concrete, etc.
Wood processing: In the woodworking industry, Angle grinders are used to trim wood surfaces, polish wood products, repair furniture, etc., which can be rough, medium and fine grinding.
Other fields: In the fields of automobile maintenance, home maintenance and art creation, Angle grinding machines are also widely used.
It should be noted that the use of Angle grinding machine need to pay attention to safety matters, such as wearing personal protective equipment, choosing the appropriate grinding wheel, to avoid hands being involved, etc. At the same time, follow the correct operating procedures to avoid accidents.

03 Correct use of Angle grinder
Before use: Wear appropriate personal protective equipment, including goggles, work gloves, masks and ear muffs.
Check whether the power cord of the Angle grinder is intact, and replace it in time if it is damaged.
Check whether the switch of the Angle grinder is normal, whether the grinding wheel is firmly installed, and whether the grinding wheel is intact.
When using the Angle grinder: turn on the switch of the Angle grinder, let the grinding wheel rotate and stabilize, and then work.
Control Angle grinder and workpiece tilt Angle, maintain about 30 to 40 degrees is appropriate.
Keep the work area clean and tidy, avoid other clutter.
Pay attention to the grinding wheel wear condition, if abnormal, immediately stop using.
When operating, the hand should be prevented from being involved, and the grinding wheel should be avoided from breaking due to excessive force.
Post-use treatment: turn off the switch of the Angle grinder in time after use, and unplug the power plug.
Put the Angle grinder back in place and keep it safe.
Clean the Angle grinder and its accessories and keep them clean and tidy.