2 Stroke 42cc 52cc 62cc 65cc Gasoline Brush Cutter Grass Trimmer
product DETAILS
product description
1、 The use of lawn mowers (irrigators)
The lawn mower is a two-stroke power system, and attention should be paid to three aspects during use: power, use, and cutting tools to ensure the normal use of the machine:
1. Engine
A. Qualified gasoline and engine oil, ensuring their mixing ratio (25:1);
B. Regularly (25 hours) check and replace the air filter, check the spark plug;
C. When storing, the body must be cleaned, the mixed fuel must be discharged, and the fuel in the vaporizer must be burned clean; Remove the spark plug, add 1-2ml of two-stroke engine oil to the cylinder, pull the starter 2-3 times, and install the spark plug.
2. Transmission
Regularly (25 hours) add lubricating grease to the gearbox, and at the same time, add lubricating grease to the joint between the upper part of the transmission shaft and the clutch disc.
3. Cutting tools
The length of the nylon cable head should be controlled to be less than 15cm. When using a blade, the balance of the blade should be ensured, and vibrating blades should not be used.
In addition, there are also some precautions:
4. Before each use, debris must be removed from the mowing area. Check the oil level, gasoline, air filter, screw tightness, blade tightness, and sharpness of the engine. For the first time or in a cold state, close the air door first, press the oil injector more than three times, turn the throttle to the maximum, and then open the air door after starting.
5. When mowing, if the grass is too long, it should be cut in stages and stages. Only one-third of the total length of the grass can be cut each time, in order to avoid yellowing after mowing.
6. If the grass area is too steep, the grass should be cut along the slope.
7. If the lawn area is too large, it is best not to exceed four hours of continuous operation of the lawn mower. After working on a box of oil, one should rest for 10 minutes and clean the loose gasket of the machine after each operation to ensure heat dissipation.